info@pecl.siInquiry

NAKANISHI HES configurator

Upgrade your existing machining center for fine milling and drilling with small tools. Get more out of the machine you already have, without buying a new one.

Supply, consulting and service

80,000 min⁻¹

HES810 maximum speed

≤ 1 µm

Spindle accuracy

350 W

Maximum power

Build a system that works

Choose series, shank and collets. Cord, controller and air line kit are added automatically.

Series

Speed and tool clamping range.

HES810 is designed for machining between 20,000 and 80,000 min⁻¹ (50,000–80,000 recommended). Lower speeds are for warm-up only.

Machine shank

The shank must match your machine's spindle taper.

Discontinued NT versions (HES510 only)

No longer in the 2026 catalogue. We check stock when you ask.

Motor cord

4, 6 or 8 m. The cord is not included with the spindle. Minimum bending radius: 60 mm.

Collets

By tool shank diameter. Choose one or more sizes and quantities. AA: run-out ≤ 2 µm.

Collets for HES810 (ø0.5–4.0 mm)

  • 91492
  • 91430
  • 91493
  • 91440
  • 91494
  • 91496
  • 91495

Collets for HES510 (ø0.5–6.35 mm)

  • 91592
  • 91530
  • 91593
  • 91540
  • 91594
  • 91560
  • 91596
  • 91597
  • 91598
  • 91599
  • 91600
  • 91601

Other diameter (on request)

Intermediate sizes in 0.1 mm steps (ø0.5–4.0 mm), no catalogue code.

System components

Required for correct and safe spindle operation. Tick what you already have.

E3000 controller

code confirmed with the quote

Power and speed control (1,000–80,000 min⁻¹). Detects the spindle automatically.

AL-C1204 air line kit

4504

Filtered air (0.3 µm) for cooling and bearing protection.

Your configuration

HES810-ST32

80,000 min⁻¹ · 350 W · ≤ 1 µm

System complete

Pos.ItemCodeQty
HES810-ST32Motor spindle78851
EMCD-810-4MMotor cord 4 m92481
E3000Controllercode confirmed with the quote1
AL-C1204Air line kit45041
CHA-4.0Collet ø4.0 mm914401

Collet nut and wrenches come with the spindle. Collets are ordered separately.

Send inquiry

This configuration is indicative. We confirm compatibility with your machine before quoting. Price on request.

Send an inquiry for this system

Besides the parts list, your machine, application and tool diameter help us. We reply with a quote and a checked configuration.

required

In your inquiry

HES810-ST32

HES810-ST32Motor spindle78851
EMCD-810-4MMotor cord 4 m92481
E3000Controllercode confirmed with the quote1
AL-C1204Air line kit45041
CHA-4.0Collet ø4.0 mm914401
Change configuration

This configuration is indicative. We confirm compatibility with your machine before quoting.

HES motor spindles

All versions per the 2026 catalogue. Find your shank and build the system in the configurator.

ModelShankCodeWeight
HES810-BT30BT3078782.0 kgBuild system
HES810-BT40BT4078792.2 kgBuild system
HES810-IT40IT4078832.4 kgBuild system
HES810-BT50BT5078804.9 kgBuild system
HES810-HSK A63HSK A6378842.6 kgBuild system
HES810-ST32ST3278852.3 kgBuild system
HES510-BT30BT3078902.2 kgBuild system
HES510-BT40BT4078912.3 kgBuild system
HES510-IT40IT4078952.6 kgBuild system
HES510-BT50BT5078925.0 kgBuild system
HES510-HSK A63HSK A6378972.7 kgBuild system
HES510-ST32ST3278992.4 kgBuild system
HES510-NT40Discontinued – stock on requestNT4078872.4 kgAsk
HES510-NT40MDiscontinued – stock on requestNT40M78882.4 kgAsk
HES510-NT50Discontinued – stock on requestNT5078895.4 kgAsk

Individual parts

For existing HES users: cords, collets, nuts, controller and air line kit.

ModelDescriptionCode
Motor cords
EMCD-810-4M4 m · Air cooling hose ø4 mm, connector cap9248Inquiry
EMCD-810-6M6 m · Air cooling hose ø4 mm, connector cap9249Inquiry
EMCD-810-8M8 m · Air cooling hose ø4 mm, connector cap9250Inquiry
Collets
CHA-2.35ø2.35 mm · HES81091492Inquiry
CHA-3.0ø3.0 mm · HES81091430Inquiry
CHA-3.175ø3.175 mm · HES81091493Inquiry
CHA-4.0ø4.0 mm · HES81091440Inquiry
CHA-3.0AAø3.0 mm · HES810 · AA ≤ 2 µm91494Inquiry
CHA-3.175AAø3.175 mm · HES810 · AA ≤ 2 µm91496Inquiry
CHA-4.0AAø4.0 mm · HES810 · AA ≤ 2 µm91495Inquiry
CHK-2.35ø2.35 mm · HES51091592Inquiry
CHK-3.0ø3.0 mm · HES51091530Inquiry
CHK-3.175ø3.175 mm · HES51091593Inquiry
CHK-4.0ø4.0 mm · HES51091540Inquiry
CHK-4.76ø4.76 mm · HES51091594Inquiry
CHK-6.0ø6.0 mm · HES51091560Inquiry
CHK-6.35ø6.35 mm · HES51091596Inquiry
CHK-3.0AAø3.0 mm · HES510 · AA ≤ 2 µm91597Inquiry
CHK-3.175AAø3.175 mm · HES510 · AA ≤ 2 µm91598Inquiry
CHK-4.0AAø4.0 mm · HES510 · AA ≤ 2 µm91599Inquiry
CHK-6.0AAø6.0 mm · HES510 · AA ≤ 2 µm91600Inquiry
CHK-6.35AAø6.35 mm · HES510 · AA ≤ 2 µm91601Inquiry
Collet nuts
CHN-ACollet nut for CHA collet (included with the spindle)2102Inquiry
K-265Collet nut for CHK collet (included with the spindle)2129Inquiry
Controller and air line kit
E3000Power and speed control (1,000–80,000 min⁻¹). Detects the spindle automatically.code confirmed with the quoteInquiry
AL-C1204Filtered air (0.3 µm) for cooling and bearing protection. Air filter, regulator, pressure gauge, ON/OFF valve.4504Inquiry

HES810 or HES510

HES810HES510
Maximum speed80,000 min⁻¹50,000 min⁻¹
Machining range20,000–80,000 min⁻¹5,000–50,000 min⁻¹
Maximum power350 W340 W
Torque6.00 cN·m8.75 cN·m
Spindle accuracy≤ 1 µm≤ 1 µm
ColletsCHA ø0.5–4.0 mmCHK ø0.5–6.35 mm
Collet nutCHN-AK-265
Weight (BT40)2.2 kg2.3 kg

Manufacturer data. We confirm suitability for your machine before you order.

Cord emergency connector

Never rotate the machine spindle with the HES installed. If it happens by accident, the emergency connector disconnects and limits damage to the machine and controller. Controller and cord must be installed according to the operation manual.

Not sure which system you need?

Send us the machine type, spindle taper, tool diameter and application. We'll put together a compatible configuration.

info@pecl.siSend an inquiry

Catalogues and documentation

NAKANISHI HES catalogue 2026 (PDF, nakanishi-spindle.com)

Data per the NAKANISHI HES catalogue 2026 (PR-K370E Ver.3). We confirm the current version and availability before ordering.